ZMI
_001_
2030
0366
54-A
C
EX90
05_#
SEN_#
AQU_V
1
.f
m
- 12 -
13. USB Mass Storage Mode
The USB Mass Storage Mode connects the Reader to a PC via a USB cable.
Data can be
• stored in the Reader (e.g. new firmware)
or
• loaded from the Reader (e.g. statistical data).
☞
Important!
The Reader must be set to the Mass Storage Mode before it is recognised by the PC
as an external drive.
Select the following menu items to go to the destination display:
13.1
Insert USB cable in Reader and PC.
13.2
The following display appears:
• The Reader is shown as a mass-storage device on the PC.
14-Jan-2018 16:03
Reader Settings
USB Mass Storage Mode
Connect PC to USB Port
Press LEFT to Exit
14-Jan-2018 16:03
USB Connected
