6
ZMI
_001_
2030
0185
62-A
Q
LT
0093
_#SE
N
_#AQ
U
_#V1
.f
m
7.
Scope of delivery
8.
Dimensions
9.
Installation example
10. Assembly
Warning!
Only operate the fitting with non-return valves and the specified filters.
Failure to observe this instruction can result in an increased germ load in the
drinking water and thus pose a health or mortality risk.
☞
Important!
Prior to the assembly process, flush the pipework in accordance with DIN 1988.
10.1
Remove the wall protection.
10.2
Use an Allen key to close the water volume regulators.
a: closed
b: open
10.3
Open the locking screws (c) of the water quantity regulators (d).
☞
Important!
Note the installation position of the filters (e).
10.4
Insert the filters (e).
10.5
Screw in the locking screws (c).
Caution!
Use an open-ended wrench to hold the water quantity regulators (d) in position while
turning the cap nuts (f).
tightening torque: 1 Nm
10.6
Remove the T-type flush connector (g) and any seals that are present.
AQLT0093
AQLT0094
AQLT0095
Name
1
1
1
AQUALINE-THERM DN15 self-closing
thermostat battery
–
1
1
Thermal disinfection option
–
–
1
Automatically emptying shower pipe
1
1
1
Frame with profile seal
1
1
1
Cover plate
1
1
2
Push-on rosette
2
2
1
Bag with filters and seals
1
1
1
Bag with attachment materials
1
1
1
Installation and operating instructions
