ZMI
_001_
2000
1026
75-ZAQ
U
A02
2_#S
EN_#A
QU_#V
2.f
m
- 6 -
10. Process of thermal disinfection
Warning!
Protective measures for persons (scald-protection) must be provided during thermal
disinfection, e.g. closing off sanitary rooms.
Failure to observe can cause bodily harm due to scalding.
Factory setting
(min. … max.)
Adjusting the
plant
Start of thermal disinfection
Actuate key switch / key pushbutton
> 8 s
(5 s - 2 min)
Heating up the circulation
• Water flows in a pulsing manner.
1 min
(1 - 240 min)
Exposure time within circulation
• Water does not flow.
1 min
(1 - 240 min)
Thermal disinfection of shower heads
3.5 min
(0.5 - 20 min)
Water saving function
• No water flows at a housing tempe-
rature upwards of 72 °
Yes
(Yes/No)
Reheat phase
• Water does not flow.
0 min
(0 - 240 min)
Safety window
• Water does not flow.
1 min
(1 - 240 min)
Cooling down phase
• Water flows in a pulsing manner.
2 min
(0.5 - 20 min)
End of thermal disinfection
