5
ZMI
_001_
2000
1009
77-ZAQ
U
A00
6_#S
EN_#A
QU_#V
1.f
m
6.
Technical Specifications
☞
The pin assignment for charging operation and UPS operation is the same.
Product group:
Uninterruptible power supply 24 V DC/2.5 A
capacity 3.2–3.5 Ah Pb
EMC:
EN 61000-6-3 (unwanted emission)
EN 61000-6-2 (interference immunity)
Type of protection
IP 20
Protection class:
III
Test voltage:
4.2 kV DC
Ambient temperature:
0 to +40 °C
Cooling:
Natural convection
Humidity:
30 to 80 % relative humidity
There must be no dew formation when the system
is to be commissioned.
Storage temperature:
-20 to +40 °C
Long-term storage:
To maintain the condensers, apply mains voltage
to the device for at least 5 min. every two years.
Input
Input DC:
24.5 V DC
Range 24.5–30 V DC
Rated current:
Max. 0.5 A charging current
Connections:
WAGO series 734 multiplug-system for
max. 1.5 mm²
Output
Protected load circuit
voltage during battery
operation:
24.0–19.2 V DC and 2.5 A
Rated voltage:
24 V DC
Range:
0–24.0 V DC (preset to 24.0 V DC)
Current:
2.5 at 19.2–24.0 V DC
Current limitation:
By means of an externally accessible 2.5 AT safety
fuse, overload protection by means of current
limitation when battery undervoltage is <18.0 V DC
Connections:
WAGO series 734 multiplug-system for
max. 1.5 mm²