FRAMOS Industrial Depth Camera D400e Series - User Manual
Version 1.0.0 from 2020-06-30
34 of 41
Figure 11 – Tool ConfigureIp Part1
Select camera from list, and then set the desired IP configuration:
Figure 12 – Tool ConfigureIp Part2
Note that the newly set IP configuration will not be active until camera is restarted.
8.1.2
Manage Camera Calibration Tables
CalibrationTables tool is used to manage calibration tables on FRAMOS Industrial Depth Camera
D400e Series. Following actions are supported:
•
Read calibration tables from device
•
Write calibration tables to device (active)
•
Write calibration tables to device ( gold)
•
Reset calibration tables on device to default gold factory settings
Usage example on Linux – running CalibrationTables tool:
./CalibrationTables
