Machine components:
Machine Base
Feeding Table
Catch Tray
Weighing Platform
Shelf
LAN Cable
Power Cable
Postage Meter
(PSD)
Ink Cartridge
Lift machine slightly on the left hand side and align the hooks to attach the feeding table
(b)
–
attach the catch tray
(c)
to the right hand side of the machine.
5
2
Lift the cover of the machine to reveal the
ink cartridge
(i)
and meter
(j)
locations.
Attach the weighing platform
(e)
and
shelf (if applicable)
(d).
6
Connect the weighing platform connector
(f)
into a COM PORT
at the back of the machine. Then connect the LAN cable
(g)
and
power cable
(h)
to either side of the machine.
7
Turn on the machine using the switch behind the
power cable
(h)
and follow the steps on screen.
8
Unpack all components from the box, remove packaging
and any transit tape.
1
Place the meter
(j)
into the meter compartment and push backwards
until it fits securely into position.
Insert the ink cartridge
(i)
at an angle into the machine with the ‘TOP’ and
‘LOCK’ stickers facing upwards. Push the ink cartridge
(i)
towards the back
of the machine until you hear a ‘click’ - close the cover of the machine.
4
3
Back of the machine
Weighing Platform
Cable
For more information or if you experience any
issues, please visit :
www.frama.co.uk/Fx7
Select LAN and press
to test connection type.
OK
Installation Process
1 LAN
9
Follow the steps on screen to complete the
procedure.
Next
Installation Process
Press the ‘Next’ to start the
Online service
declaration.
10
11
Your machine is now ready
to use. Please turn over
for your
Quick Start Guide
.
Fx Series 7
Quick Installation Guide
Remove tabs from
print heads before
inserting into unit!
