Connect the weighing platform connector
(e)
into the COM PORT on the
back of the machine. Then connect the LAN cable
(f)
and power cable
(g)
to each side of the machine.
7
Open the cover. Place the meter
(i)
into the meter compartment and push
backwards until it fits securely into position. Close the cover.
3
Machine components:
Machine Base
Feeding Table
Catch Tray
Weighing Platform
LAN Cable
Power Cable
Postage Meter
(PSD)
Ink Cartridge
Unpack all components from the box, remove packaging
and any transit tape.
1
Lift machine slightly on the left hand side and align the hooks to attach the feeding table
(b)
–
align the catch tray
(c)
to the right hand side of the machine.
5
Lower weighing platform release panel at the back of
the machine. Place weighing platform
(d)
on top of the
machine and slide forward to lock. Lift panel to secure
and clip cable into place.
Insert the ink cartridge
(h)
at an angle into the machine with the ‘TOP’ and ‘LOCK’
stickers facing upwards. Push the ink cartridge
(h)
towards the back of the machine
until you hear a ‘click’ - close the cover of the machine.
Turn on the machine using the switch behind the
power cable
(g)
and follow the steps on screen.
8
Lift the cover of the machine to reveal the ink
cartridge
(h)
and meter
(i)
bays.
2
6
4
Back of the machine
Weighing Platform
Cable
Fx Series 5
Quick Installation Guide
For more information or if you experience any
issues, please visit :
www.frama.co.uk/Fx5
Select LAN and press
to test connection type.
OK
Installation Process
1 LAN
9
Follow the steps on screen to complete the procedure
Next
Installation Process
Press the ‘Next’ to start the
Online service
declaration.
10
Mem
Mem
11
Your machine is now ready
to use. Please turn over
for your
Quick Start Guide
.
Remove tabs from
print heads before
inserting into unit!