UK
M.FACSW22.1-06 Multilanguage 26/06/2017
19
The machine must not be cleaned using water. To clean the machine use
a wet cloth.
Remember to disconnect the plug from the socket before.
This machine has been designed and manufactured in compliance with
the strictest safety rules. Therefore, pointed instruments (screw drivers,
wool needles or similar ones) are not to be inserted in the grilles or in any
other opening of the panels, especially when it is opened to remove the
filter.
When the machine is connected with a power socket, it must be in vertical
position and any rough move must be avoided because it could cause
some water to come into contact with electrical parts; it is, therefore,
recommended to remove the plug from the socket before moving around
the machine; if any water may have been spread on the machine,
following some rough handling of the same, then, the machine must be
turned off and can be started up again only after 8 hours.
Attention: before every operation of servicing on the unit, be sure that the
electric supply is disconnected.
Never remove front grille or open any part of
the machine without removing first the socket from the plug.
Main supply must be protected with a differential switch.
Never modify settings of the safety devices.
Never sprinkle water over the unit and its electrical components.
It must not be used under explosive atmosphere.
Machine is not designed to be used by people (also children) whose
physical, sensory or mental capabilities are reduced. Also people without
experience or knowledge of the machine can’t use it.
People, described above, can use this machine only if there’s someone,
responsable of their safety, which watches them and gives them
instruction regarding the use of the machine.
Children must be watched in order to be sure they don't play with
machine.
This machine is designed in order to be used by experienced users or
trained in shops, light industry and farms.
People without experiences can use this machine only for a commercial
use.
