Doc Q7.0
159
Tempo-synchronized sound functions track changes to Global Tempo in real time, increasing or decreasing as it
speeds up or slows down.
Tempo to Use
12.3
Every preset contains two saved
TEMPO
settings: an actual
TEMPO
(BPM) and a second setting called
TEMPO TO USE.
If a preset’s
TEMPO TO USE
parameter is set to “PRESET,” the
Global Tempo
will change
to the saved BPM value
whenever that preset is loaded. Factory presets in the Axe-Fx II are saved with a tempo of 120 BPM and a
TEMPO
TO USE
setting of “PRESET.”
If a preset’s
TEMPO TO USE
parameter is instead set to “GLOBAL,” its saved BPM value will be
ignored
, and the
current Global Tempo will be used.
Auto Delay
12.4
When set to “ON,” any delay blocks that are bypassed will become active whenever a tempo is tapped in. This
allows you to set the tempo and un-bypass your delay block(s) from a single footswitch.
Metronome
12.5
The Axe-Fx II features a built in metronome whose signal is mixed in at Output 1.
METRONOME
– Turns the metronome on or off.
METRO LEVEL
– Sets the level of the metronome from +/- 20db
