IN 3C08/12/15/18.
- 15 -
© Future Products Group
CLEANING
Cautions
REFRIGERATED CABINETS
-
CLEANING
Power
ALWAYS TURN THE POWER SUPPLY OFF BEFORE CLEANING.
Water
THIS UNIT IS NOT WATERPROOF. DO NOT USE A WATER JET SPRAY TO
CLEAN THE INTERIOR OR EXTERIOR OF THIS CABINET.
Exterior
REFRIGERATED CABINETS
-
CLEANING
Metal Surfaces
Stainless steel or aluminium surfaces should be cleaned with hot soapy water or
a good quality metal cleaning compound. DO NOT clean surfaces with abrasive
pads or cleaners (e.g. Scotchbrite pads or Jif), as stainless steel and aluminium
surfaces will be damaged.
Glass
All glass should be cleaned using a good quality glass cleaner and a clean
cloth.
DO NOT
use abrasive pads or cleaners, because they will damage the surface
of the glass.
Sliding Doors
Sliding glass doors are located by plastic guides
at the top and bottom.
The doors can be removed for cleaning by sliding
the door to a central position, placing hands
either side of the door, lifting it up and then
swinging it out at the bottom.
When replacing doors, make sure that they are
located in the correct slots, top and bottom. The
left door should be in the inner slots, and the right
door in the outer slots.
Sliding door tracks should be vacuumed out
regularly to keep doors sliding freely.
Continued on next page