FPG IN 3C06S, Product Manual

Page: 23 / 56

IN 3C06,09,12,15-SQ
- 23 - © Future Products Group
SERVICING
Control Gear
REFRIGERATED CABINETS
-
SERVICING
Location The electrical control gear is
located in the top of the
cabinet.
Remove the top plate to
access the control gear.
The chassis has power
supplies for the lights, the
refrigeration controller and a
protective fuse.
Lighting
REFRIGERATED CABINETS
-
SERVICING
Caution Do not service lights without isolating the cabinet from the mains supply.
Shelf Lights Shelf lights are an optional extra, which can be fitted during manufacture.
Test Lighting
Components Before replacing an LED strip, check that the power supply is working.
If there is no dc voltage at the output, the power supply should be replaced.
If there is a dc output, the LED assembly must be replaced.
Access to LED
Strips
The LED strips are protected
with plastic covers. These clip
into grooves in the aluminium
extrusion.
Remove the plastic cover to
access the LED strip.
The top light assembly is
different from the shelf lights,
so the correct replacement
unit must be used.
Continued on next page