FP PostBase Operator'S Manual Download

Page: 45 / 204

Setting the franking imprint

4.3

Advertising imprints

PostBase One can print up to two advertising imprints of your choice on your mail
pieces. Advertising imprints may be:

– Graphical adverts
– Text messages / SMS texts.

You can print advertising imprints in any order.

Set an advertising imprint

In the Home screen:

• Press one of the advertising imprint but-

tons.

PostBase One opens a list with all available
advertising imprints.

• Press the desired advertising imprint.

PostBase One returns to the Home screen.
The advertising imprint is set for franking.

Set the second advertising imprint in the
same manner.

You can enter and change SMS texts via PC
software from Francotyp-Postalia (e.g. Navi-
gator). For details on how to manage adver-
tising imprints on the PC, please read the
manual provided with the software.

Advertising imprints

Summary of Contents for PostBase













































































































































































































Search results

Summary of Contents for PostBase

Reviews:

Related manuals for PostBase

Brands by name

Popular brands

FP PostBase, Operator'S Manual

Search results

Summary of Contents for PostBase

Reviews:

Related manuals for PostBase

Brands by name

Popular brands