FP PostBase Vision Reference Manual Download

Page: 135 / 206

Maintenance and care

135

Check print quality

Make sure PostBase Vision always produces
clean and legible franking imprints.

• Check the print quality. There must not be

any blurred or blank spots.

This illustration shows a perfect imprint.

When there are blurred or blank spots in the
imprint:

• Clean print system. Read chapter 18.3 on

page 131.

18.5

Print system: show ink level

The approximate ink level of the cartridge is shown by the icon in the menu bar (full,
75%, 50%, 25%, empty). With this feature, you can track ink consumption at a glance.
You can also view the ink level as a percentage in the I

CARTRIDGE

menu.

• Open the M

ENU

• Choose I

ARTRIDGE

• Choose I

EVEL

PostBase Vision displays the ink cartridge’s
filling level as a percentage.

Summary of Contents for PostBase Vision















































































































































































































Search results

Summary of Contents for PostBase Vision

Reviews:

Related manuals for PostBase Vision

Brands by name

Popular brands

FP PostBase Vision, Reference Manual

Search results

Summary of Contents for PostBase Vision

Reviews:

Related manuals for PostBase Vision

Brands by name

Popular brands