FP Postbase Mini, Operator'S Manual, Page: 6 / 108

PostBase Mini 6
1 Safety tips
PostBase Mini is a digital franking machine with ink-jet print technology for franking
mail. PostBase Mini complies with the pertinent safety regulations for office informa-
tion equipment.
Please observe the following tips for your own safety:
Prevention of electrical hazards
• Operate the PostBase Mini only on a grounded single-phase power socket. Make
sure your office power supply conforms to the power requirements indicated on the
power supply unit’s serial number plate.
• Only use one of the power supply units specified in the appendix “Technical Data”.
Make sure that the power supply unit is not damaged.
• Make sure the socket for connecting the PostBase Mini is close by and easily
accessible at all times.
• Unplug the mains plug in case of an emergency. Call the Customer Support.
• Take special care that no foreign objects or liquids penetrate the interior of the
PostBase Mini.
• Unplug the mains plug prior to cleaning the PostBase Mini.
Prevention of mechanical hazards
• Do not remove any equipment related to safety or protection. Do not make them
inoperative or unable to function.
• Do not remove any parts of the housing.
Accessories and consumables
• We recommend to use only approved FP equipment and FP original parts. The
manufacturer FP has established reliability, safety and applicability. The manufac-
turer cannot assess the reliability, safety and applicability for products not approved
by FP, and therefore not vouch for such products. The full functioning of the
PostBase Mini franking machine at the time of delivery can only be guaranteed
when using original Francotyp-Postalia ink cartridges.
• Only use one of the power supply units specified in the appendix “Technical Data”.
Make sure that the power supply unit is not damaged.