Using the incoming mail stamp function
35
Closing incoming mail stamp mode and
switching to franking mode
•
Using the
key, you can switch directly into
franking mode without restarting.
All settings from the incoming mail stamp mode
(different incoming mail stamp, print offset) are lost.
In incoming mail stamp mode you can also switch off
the optimail with the key-operated switch as normal.
10.3 Setting a print offset
The optimail prints the incoming mail stamp around
10 mm from the right-hand edge of the incoming
mail. You can set a print offset, and thus increase
the distance by a maximum of 99 mm.
•
Enter the desired distance with the numeric keys
(in the example 12 mm).
•
Confirm with the
key.
A flashing arrow pointing to the left shows that the
imprint has moved.
Pressing the
key shows the set print offset.
Switching off the print offset
•
Enter “0” for the print offset.
•
Confirm with the
key.
