MX16/MX16 Pro 16-Channel Radio Controller
User Manual
©
2020 FOXTECH All Rights Reserved
20
FAQ
1.（Can the remote controller install other apps?
Remote control terminal permissions are fully open, without any special software and restrictions on software
installation and uninstallation.
2.（How does the remote control enter fast charge mode?
Must use a special charger to enter the quick charge mode. There is a text prompt on the lock screen.
3.（How to get the RTSP address if using MIPI or HDMI camera?
Open the MX16 Assistant, open ‘video check’, click Settings (virtual button), click the video stream address,
click Customize to copy the link starting with THE RTSP below. And then paste it
4. No datalink connection
check if the ground control station connet the remote control at the type of UDP, if the listening port is
14551. Check if baud rate is normal. Check if RX TX connected reversely.
5. Images cannot be displayed when connected to the webcam.
Images transmitted over a network port with a dedicated RTSP address, which is not common with MIPI/
HDMI address. Please ask the webcam manufacturer for this RTSP address.
6. The remote control fails to connect to the Internet through ethernet port.
Please turn off WIFI when connecting 4G network card and network port.
（（
7. The remote control cannot connect to WIFI.
The remote control can only connect to 5G Wi-Fi, can change the phone hot spot to 5G.