FOXTECH Map-02 Mapping Camera
User Manual
©
2018 FOXTECH All Rights Reserved
9
Don't operate the camera immediately after power-on. After 15s self-checking, the camera will acquire the
usual parameters for mapping, and it can meet he requirements of most missions. You also could set up the
parameters by the menu button on the top of the camera.
Power Supply for Camera
Power Connection: Connect the 2S (DC8.4V) positive wire to camera Pin 2(+), and negative wire to camera
Pin 1(GND-).
This content is subject to change.
Download the latest version from
https://www.foxtechfpv.com/foxtech-map-01-camera.html
For everyday updates, please follow Foxtech facebook page"
".
