Foxtech EH640 30x Optical Zoom IR Thermal Camera
User Manual
©
2020 FOXTECH All Rights Reserved
11
Setting area
Interface shifting
Camera setting
photo
REC
One key downward
One key forward
Yaw following
Manual focus+
Auto focus
Manual focus-
Target following
GCS Software Usage Instructions
Connection
Operating Pods
A. Preparation.
After the software is installed, ensure that the pod, datalink(sky, ground end) works properly, the network
cable is connected to the computer, and the computer is not connected to the wifi at this time. Through
local connection
→
Properties
→
Internet Protocol Property 4 (TCP / IPv4)
→
General Settings
→
Use the
following IP address: (Different data link settings are different, see the corresponding data link user manual
for details)
→
Confirm
5.8G Datalink :(also optional to get an IP address automatically, but make sure your computer wifi is off, and
not connected to another network)
IP Address :192.168.42.10 Subnet Mask :255.255.255.0 Default Gateway (ignored)
Rain Bow-R1S (1.4g band):
IP Address :192.168.2.10
Subnet Mask :255.255.255.0
Default Gateway :192.168.2.129
B. After setting up, open the GCS software to click on the connection
→
select the corresponding pod.
When the image appears, the full display control settings of the pod can be realized.
GCS pod software through the mouse, virtual keys, USB joystick to achieve the full operation of the pod.
