Foxtech DA16 Radio Control System
User Manual
©
2018 FOXTECH All Rights Reserved
13
(4) In transmitter “Comm Set” menu, tap on “Bind” button, and
wait for 1 second, when both transmitter status indicator and
receiver indicator blink green, linking steps are done.
Before linking transmitter to receiver, make sure aircraft engine is powered off and motor wires are off
connection.
Reboot receiver when linking steps are done, and try to manipulate on transmitter to confirm if linking
is successful.
DA16 transmitter’s throttle joystick has two types, Thumb-slide and self-centering joystick. Users can select
throttle joystick type according to their preferences.
Thumb-slide Joystick:
While users are powering on transmitter, it alerts with voice broadcast if throttle
joystick is not in its bottom position, and disables RF transmitting automatically (transmitter status indicator is
off). Transmitter will not enable RF transmitting until throttle joystick was back in bottom position.
Self-centering Joystick:
No alert, transmitter works normally.
Step to Select Transmitter Joystick Type
In transmitter “System Settings” menu, tap on “Comm Set”, then tap on “Thr – Thumb-slide / Self-centering”
to select your favorite type.
Select Transmitter Throttle Joystick Type
