Foxpro X2S Series, Instruction Manual

Page: 24 / 60

24
Default: Categories View
When the X2S remote is turned on, the main screen will be displayed. The first item is
“Favorites/Presets” followed by “FOXCAST”. The next menu item marks the beginning of the
category listings. In category list mode, your sounds will not be displayed as one long list, but
rather as elements of defined categories. You can have up to 50 unique categories. Use the
Scroll Buttons to browse through the available categories. Highlight the category you wish to
browse and push the “Play/Select” button to enter the category. All sounds associated with
that category will be displayed. Find the sound you wish to play, and then push the
“Play/Select” button to begin playback of the sound. Unless you changed the volume prior to
pushing “Play/Select”, the volume will start off at level 0, so you will need to increase the
volume using the volume up button in order to hear it play.
Optional: Sound List Mode
When selected, this option allows you to scroll through all available sounds in a single list. The
main screen will display “Favorites/Presets” and “FoxCast”, like normal, but a third option titled
“Sound List” will be present. To browse the sound list, select “Sound List” from the main screen.
You will then see a page that displays the first 9 sounds (000 – 008) loaded in the list. You can
use the Scroll Buttons to cycle through the sounds. Once you get to the end of the current
page, the proceeding lines will advance one-by-one. After highlighting the name of the sound
you wish to play, you can then push the “Play/Select” button a single time to start playback of
your primary sound. Unless you changed the volume prior to pushing “Play/Select”, the volume
will start off at level 0, so you will need to increase the volume using the volume up button in
order to hear it play.
4-9 Volume & Mute Control
The volume can be adjusted by using the “Volume Up” and “Volume Down” buttons on the
keypad mid-operation, prior to selecting a sound, or even while the caller is muted. Volume
ranges from 0 through 40 and the volume is increased in steps. These steps are configured
through the main menu under Sound Settings. The available stepping values are 1, 2, 3, and 5.
By default, the X2S remote is set for a volume stepping value of 2. Volume can be controlled
automatically by a feature called Auto Volume.
IMPORTANT NOTE
When you mute a sound with the X2S remote control, the X2S game call display will show an
“M” to the right of the onboard volume level indicator as well. If you are actively using a
FOXFUSION sound, only the primary sound will display an “M” while muted whereas the X2S
remote shows “_/M” to indicate the FOXFUSION sound is muted. If you perform a double-
mute to simultaneously mute both sounds, the X2S will display an “M” while the remote
shows “M/M”.