DHCPv6 Configuration
276
2. To enable DHCPv6 prefix delegation client function on port
Command
Explanation
Interface Configuration Mode
ipv6 dhcp client pd <
prefix-name
>
[rapid-commit]
no ipv6 dhcp client pd
To enable client prefix delegation request
function on specified port, and the prefix
obtained associate with universal prefix
configured.
32.6
DHCPv6 Configuration Examples
Example1:
When deploying IPv6 networking, the switch can be configured as DHCPv6 server in
order to manage the allocation of IPv6 addresses. Both the state and the stateless
DHCPv6 are supported.
Topology:
The access layer use Switch1 switch to connect users of dormitory buildings; Switch2
is configured as DHCPv6 relay delegation in primary aggregation layer ; Switch3 is
configured as DHCPv6 server in secondary aggregation layer, and connected with
backbone network or higher aggregation layers; The Windows Vista which be provided
with DHCPv6 client must load on PC.