FoxGate S63 series, Configuration Manual, Page: 111 / 565

EFM OAM Configuration
110
4. Enable EFM OAM loopback of port
12.3
EFM OAM Example
Example:
CE and PE devices with point-to-
point link enable EFM OAM to monitor ―the First Mile‖
link performance. It will report the log information to network management system when
occurring fault event and use remote loopback function to detect the link in necessary
ethernet-oam errored-symbol-period
threshold high {high-symbols | none}
no ethernet-oam errored-symbol-period
threshold high
Configure the high threshold of
errored symbol period event, no
command restores the default
value. (optional)
ethernet-oam errored-frame-period
threshold high {high-frames | none}
no ethernet-oam errored-frame-period
threshold high
Configure the high threshold of
errored frame period event, no
command restores the default
value. (optional)
ethernet-oam errored-frame threshold high
{high-frames | none}
no ethernet-oam errored-frame threshold
high
Configure the high threshold of
errored frame event, no command
restores the default value.
(optional)
ethernet-oam errored-frame-seconds
threshold high {high-frame-seconds | none}
no ethernet-oam errored-frame-seconds
threshold high
Configure the high threshold of
errored frame seconds event, no
command restores the default
value. (optional)
Command Explanation
Port mode
ethernet-oam remote-loopback
no ethernet-oam remote-loopback
Enable remote EFM OAM entity to
enter OAM loopback mode (its
peer needs to configure OAM
loopback supporting), no command
cancels remote OAM loopback.
ethernet-oam remote-loopback supported
no ethernet-oam remote-loopback
supported
Enable remote loopback
supporting of port, no command
cancels remote loopback
supporting of port.