FoxGate S6124, Command Manual, Page: 25 / 391

25
Example:
Switch#debug ssh-server
1.1.7 enable
Command: enable
disable
Function: Enter Admin Mode from User Mode.
Command mode: User Mode/ Admin Mode.
Usage Guide: To prevent unauthorized access of non-admin user, user authentication is
required (i.e. Admin user password is required) when entering Admin Mode from User
Mode. If the correct Admin user password is entered, Admin Mode access is granted; if 3
consecutive entry of Admin user password are all wrong, it remains in the User Mode. Set
the Admin user password under Global Mode with ―
enable password
‖ command.
Example:
Switch>enable
Switch#
1.1.8 enable password
Command: enable password [0 | 7] <password>
no enable password
Function: Configure the password used for enter Admin Mode from the User Mode,
The ―
no enable password
‖ command deletes this password.
Parameter: password is the password for the user. If input option 0 on password setting,
the password is not encrypted; if input option 7, the password is encrypted.
Command mode: Global Mode
Default: This password is empty by system default
Usage Guide: Configure this password to prevent unauthorized entering Admin Mode. It
is recommended to set the password at the initial switch configuration. Also, it is
recommended to exit Admin Mode with ―
exit
‖ command when the administrator needs to
leave the terminal for a long time.
Example:
Set the Admin user password to ―admin‖.
Switch(config)#enable password 0 admin
1.1.9 end
Command: end