224
21.24 show ipv6 dhcp binding
Command:
show
ipv6
dhcp
binding
[
<ipv6-address>
|
pd
<ipv6-prefix|prefix-length
>|count]
Function:
To show all the address and prefix binding information of DHCPv6.
Parameter:
<ipv6-address>
is the specified IPv6 address;
count
show the number of
DHCPv6 address bindings.
Command Mode:
Admin and Configuration Mode.
Usage Guide:
To show all the address and prefix binding information of DHCPv6, include
type, DUID, IAID, prefix, valid time and so on.
Example:
Switch#show ipv6 dhcp binding
Client: iatype IANA, iaid 0x0e001d92
DUID: 00:01:00:01:0f:55:82:4f:00:19:e0:3f:d1:83
IANA leased address: 2001:da8::10
Preferred lifetime 604800 seconds, valid lifetime 2592000 seconds
Lease obtained at %Jan 01 01:34:44 1970
Lease expires at %Jan 31 01:34:44 1970 (2592000 seconds left)
The number of DHCPv6 bindings is 1
21.25 show ipv6 dhcp interface
Command: show ipv6 dhcp interface [<
interface-name
>]
Function:
To show the information for DHCPv6 interface.
Parameter:
<interface-name>
is
the
name
and
number
of
interface, if
the
<interface-name>
parameter is not provided, then all the DHCPv6 interface
information will be shown.
Command Mode:
Admin and Configuration Mode.
Usage Guide:
To show the information for DHCPv6 interface, include Port Mode (Prefix
delegation client
、
DHCPv6 server) , and the relative conformation information under all
kinds of mode.
Example:
Switch
#
show ipv6 dhcp interface vlan10
Vlan10 is in server mode
Using pool: poolv6
Preference value: 20
Summary of Contents for S6124
Page 311: ...311 Machine...
Page 314: ...314...
