223
clients. This command can be used in association with the
ipv6 local pool command. For
one address pool, only one prefix delegation pool can be bound. When trying to remove
the prefix name configuration, the prefix delegation service of the server will be
unavailable, if both the address pool is not associated with the prefix delegation pool and
no static prefix delegation binding is enabled.
Example:
Switch(dhcp-1-config)#prefix-delegation pool abc
21.22 service dhcpv6
Command: service dhcpv6
no service dhcpv6
Function:
To enable DHCPv6 server function; the no form of this command disables the
configuration.
Parameter:
None.
Default:
Disabled.
Command Mode:
Global Mode.
Usage Guide:
The DHCPv6 services include DHCPv6 server function, DHCPv6 relay
function, DHCPv6 prefix delegation function. All of the above services are configured on
ports. Only when DHCPv6 server function is enabled, the IP address assignment of
DHCPv6 client, DHCPv6 prefix delegation function enabled can be configured on ports.
Example:
To enable DHCPv6 server.
Switch(config)#service dhcpv6
21.23 show ipv6 dhcp
Command: show ipv6 dhcp
Function:
To show the enable switch and DUID of DHCPv6 service.
Command Mode:
Admin and Configuration Mode.
Usage Guide:
To show the enable switch and DUID of DHCPv6 service, this command
only can support the DUID type of DUID-LLT. The DUID types are the same not only
displayed but also required in client and server identifier options.
Example:
Switch
#
show ipv6 dhcp
DHCPv6 is enabled
DUID is <000100060000000500030f112233>
Summary of Contents for S6124
Page 311: ...311 Machine...
Page 314: ...314...
