FoxGate S6124, Command Manual

Page: 222 / 391

222
Parameters: < ipv6-prefix/prefix-length > is the length of the prefix to be allocated to the
client. < client-DUID > is the DUID of the client. DUID with the type of DUID-LLT and
DUID-LL are supported, the DUID of DUID-LLT type should be of 14 characters. < iaid > is
the value to be appended in the IA_PD field of the clients‘ requests.
< valid-time > and
< preferred-time > are the valid life time and the preferred life time of the IPv6 address
allocated to the clients respectively, in seconds, and its value is allowed between 1 and
31536000. However <preferred-time> should be less than <valid-time>. If not configured,
the default <valid-time> will be 2592000, while <preferred-time> will be 604800.
Command Mode: DHCPv6 Address Pool Configuration Mode.
Default: Disabled.
Usage Guide: This command configures the specified IPv6 address prefix to bind with
the specified client. If no IAID is configured, any IA of any clients will be able get this
address prefix. At most eight static binding address prefix can be configured for each
address pool. For prefix delegation, static binding is of higher priority than the prefix
address pool.
Example: The following command will allocate 2001:da8::/48 to the client with DUID as
0001000600000005000BBFAA2408, and IAID as 12.
Switch(dhcp-1-config)#prefix-delegation 2001:da8::/48
0001000600000005000BBFAA2408 12
21.21 prefix-delegation pool
Command: prefix-delegation pool <poolname> [lifetime <valid-time >
<preferred-time > ]
no prefix-delegation pool <poolname>
Function: To configure prefix delegation name used by DHCPv6 address pool. The no
form of this command deletes the configuration.
Parameters: < poolname > is the name of the address prefix pool, the length name string
should be less than 32. < valid-time > and < preferred-time > are the valid life time and the
preferred life time of the IPv6 address allocated to the clients respectively, in seconds, and
its value is allowed between 1 and 31536000. However <preferred-time> should be less
than <valid-time>, if not configured, the default <valid-time> will be 2592000, while
<preferred-time> will be 604800.
Command Mode: DHCPv6 address pool configuration mode.
Default: The prefix delegation name used by DHCPv6 address pool is not configured.
Usage Guide: This command configures the name of the address prefix pool for address
allocation. If configured, the addresses in the prefix address pool will be allocated to the