215
Command Mode:
Admin Mode.
Example:
Switch
#
debug ipv6 dhcp server packet
21.7 dns-server
Command: dns-server
<ipv6-address>
no dns-server
<ipv6-address>
Function:
To configure the IPv6 address of the DNS server for DHCPv6 client; the no
form of this command will remove the DNS configuration.
Parameter:
<ipv6-address>
is the IPv6 address of DNS Server.
Default:
No configured address pool of DNS Server by default.
Command Mode:
DHCPv6 Address Pool Configuration Mode.
Usage Guide:
For each address pool, at most three DNS server can be configured, and
the addresses of the DNS server must be valid IPv6 addresses.
Example:
To
configure the DNS Server address of DHCPv6 client as 2001:da8::1.
Switch(dhcp-1-config)#dns-server 2001:da8::1
21.8 domain-name
Command: domain-name
<domain-name>
no domain-name
<domain-name>
Function:
To configure domain name of DHCPv6 client; the no form of this command will
delete the domain name.
Parameter:
<domain-name>
is the domain name, less than 32 characters.
Command Mode:
DHCPv6 Address Pool Configuration Mode.
Default:
The domain name parameter of address pool is not configured by default.
Usage Guide:
At most 3 domain names can be configured for each address pool.
Example:
To set the domain name of DHCPv6 client as test.com
Switch(dhcp-1-config)#domain-name test.com
21.9 excluded-address
Command: excluded-address
<ipv6-address>
no excluded-address
<ipv6-address>
Function:
To configure the specified IPv6 address to be excluded from the address pool,
Summary of Contents for S6124
Page 311: ...311 Machine...
Page 314: ...314...
