137
Chapter 12 Commands for MSTP
12.1 Commands for MSTP
12.1.1 abort
Command: abort
Function:
Abort the current MSTP region configuration, quit MSTP region mode and
return to global mode.
Command mode:
MSTP Region Mode.
Usage Guide:
This command is to quit MSTP region mode without saving the current
configuration. The previous MSTP region configuration is valid.
Example:
Quit MSTP region mode without saving the current configuration.
Switch(Config-Mstp-Region)#abort
Switch(config)#
12.1.2 exit
Command: exit
Function:
Save current MSTP region configuration, quit MSTP region mode and return to
global mode.
Command mode:
MSTP Region Mode
Usage Guide:
This command is to quit MSTP region mode with saving the current
configuration.
Example:
Quit MSTP region mode with saving the current configuration.
Switch(Config-Mstp-Region)#exit
Switch(config)#
12.1.3 instance vlan
Command: instance
<instance-id>
vlan <
vlan-list>
no instance
<instance-id>
[vlan
<vlan-list>
]
Function:
In MSTP region mode, create the instance and set the mappings between
VLANs and instances; t
he command ―
no instance
<instance-id>
[vlan
<vlan-list>
]
‖
removes the specified instance and the specified mappings between the VLANs and
instances.
Parameter:
Normally,
<instance-id>
sets the instance number. The valid range is from 0
Summary of Contents for S6124
Page 311: ...311 Machine...
Page 314: ...314...
