129
packet;
<vlan-id>
is the vlan number.
source
is based on source address filter;
destination
is based on destination address filter;
both
is based on source address and
destination address filter, the default is both.
Command Mode:
Global Mode
Default:
When VLAN interface is configured and is up, the system will generate an static
address mapping entry of which the inherent MAC address corresponds to the VLAN
number.
Usage Guide:
In certain special applications or when the switch is unable to dynamically
learn the MAC address, users can use this command to manually establish mapping
relation between the MAC address and port and VLAN.
no mac-address-table
command is for deleting all dynamic, static, filter MAC address
entries existing in the switch MAC address list, except for the mapping entries retained in
the system default.
Example:
Port 1/1 belongs to VLAN200, and establishes address mapping with MAC
address 00-03-0f-f0-00-18.
Switch(config)#mac-address-table static address 00-03-0f-f0-00-18 vlan 200 interface
ethernet 1/1
11.1.3 show mac-address-table
Command:
show mac-address-table [static | blackhole | multicast | aging-time
<
aging-time
> | count] [address <
mac-addr
>] [vlan <vlan-id>] [count] [interface
<interface-name>]
Function:
Show the current MAC table.
Parameter:
static
static entries;
blackhole
filter entries;
aging-time <
aging-time
>
address aging time;
count
entry‘s number,
multicast
multicast entries;
<mac-addr>
entry‘s MAC address;
<vlan-id>
entry‘s VLAN number;
<interface-name>
entry‘s
interface name.
Command mode:
Admin Mode and Configuration Mode.
Default:
MAC address table is not displayed by default.
Usage guide:
This command can display various sorts of MAC address entries. Users
can also use
show mac-address-table
to display all the MAC address entries.
Example:
Display all the filter MAC address entries.
Switch#show mac-address-table blackhole
Summary of Contents for S6124
Page 311: ...311 Machine...
Page 314: ...314...
