P/N
NAME
EXTERIOR
COLOR
931-311
HammerHead UV 395 nm
Silver
931-312
HammerHead Blue 470 nm
Silver
931-313
HammerHead Cyan 495 nm
Silver
931-314
HammerHead Green 525 nm
Silver
931-332
HammerHead Blue 450 nm
Silver
931-365
HammerHead UV 365 nm
Silver
931-380-395
HammerHead Dual UV 380 +
395 nm
Silver
PHYSICAL CHARACTERISTICS
Aluminum 6061-T6 hard anodized housing
BATTERY TYPE & BATTERY LIFE
*Battery life may vary according to mode selected, battery quality and
prevailing ambient conditions.
NOTE:
Mixing of new and used or different batteries is not
recommended as this could lead to leakage or explosion.
BATTERY INSTALLATION/REPLACEMENT
1. Each flashlight consists of: Head, Handle and End Cap
2. To install batteries, first remove the End Cap at the
rear of the Main Body.
3. Insert required batteries with the positive terminal (a
plus sign) facing the front of the flashlight.
4. After inserting all batteries, replace the End Cap
securely.
5. Test the light’s performance by activating the Power/
Mode Switch below the light head.
NOTE: In the event that the batteries get stuck within the
handle, they can be removed by unscrewing the handle
from the head. Use a blunt device to push them out.
OPERATIONAL MODES
FOR P/N 931-311, 931-312, 931-313, 931-314, 931-332,
& 931-365:
MODE 1: LOW
MODE 2: HIGH
MODE 3: OFF
FOR P/N 931-380-395:
MODE 1: FIRST LED WAVELENGTH
MODE 2: SECOND LED WAVELENGTH
MODE 3: OFF
HAMMERHEAD SERIES PRODUCT MANUAL
Head
Handle
Power/Mode Switch
Model
Dimensions
All models
Length: 6.6 in (168 mm)
Head: 2.2 x 1.5 in (55 x 38 mm)
Handle Diameter: 1.1 in (28 mm)
Model
Battery Type
Battery Life*
All Models
2 CR123s
1.5 - 4 hours
1 18650
1.5 - 4 hours
End Cap
