manualshive.com logo in svg

Foxconn K8S760MG series, User Manual, Page: 55 / 108

Share
Download
Foxconn K8S760MG series User Manual Download Page 55

48

Chapter 3   BIOS Description

LCD Display Type (Default: Full Screen)

   

This option is used to select LCD display type. The setting values are: Full

Screen, Center Screen.

LCD Panel Resolution (Default: 1024 x 768)

   

This option is used to select LCD panel resolution. The setting values are:
1024x768, 1280x1024, 1400x1050, 1688x806, 1600x1200, 1400x806.

TV Setting (Default: Disabled)

This option is used to enable or disable TV setting. The setting values are:
Disabled and Enabled.

TV Display Mode (Default: NTSC)

This option is used to select TV display mode. The setting values are: NTSC,
NTSC-J, PAL, PAL-M, PAL-N.

TV Display Type (Default: Under Scan)

This option is used to set TV display type. The setting values are: Under Scan,
Over Scan.

YPbPr Mode (Default : 525i)

This option is used to set YPbPr mode. The setting values are: 525i, 525p,
750p, 1080i.

Graphics Engine Clock (Default: 133 MHz)

This option is used to set graphics engine clock. The setting values are:
100 MHz, 133 MHz, 166 MHz, 200 MHz.

GUI Memory Clock (Default: 183 MHz)

    

This option is used to set GUI memory clock. The setting values are: 133 MHz,

166 MHz, 183 MHz, 200 MHz.

Ｋ８Ｓ７６０ＭＧ－ＷＩＮＦＡＳＴ－Ｖ１．０　．ｐ６５

2004-9-14, 8:42

48

Summary of Contents for K8S760MG series













































































































Reviews:

No comments