Foxconn G9657MA series Page 31 Manual Download

Page: 31 / 69

Chapter 3 BIOS Description

Award (Phoenix) BIOS can support 3 HDD modes: CHS, LBA and Large or Auto mode.

CHS

For HDD<528MB

LBA

For HDD>528MB & supporting LBA (Logical Block Addressing)

Large

For HDD>528MB but not supporting LBA

Auto

Recommended mode

Drive A

This option allows you to select the kind of FDD to be installed, including

“

None

”

[360K, 5.25 in], [1.2M, 5.25 in], [720K, 3.5 in], [1.44M, 3.5 in] and [2.88 M, 3.5 in].

Halt On

This category determines whether or not the computer will stop if an error is
detected during powering up.

All Errors

Whenever the BIOS detects a nonfatal error, the system
will stop and you will be prompted.

No Errors

The system boot will not stop for any errors that may
be detected.

All, But Keyboard

The system boot will not stop for a keyboard error; but
it will stop for all other errors.

All, But Diskette

The system boot will not stop for a diskette error; but
it will stop for all other errors.

All, But Disk/Key

The system boot will not stop for a keyboard or disk
error, but it will stop for all other errors.

Memory

This is a Display-Only Category, showing the capacity of memory installed
in your computer.

BIOS ID

This item identifies the BIOS version.

PDF

文件使用

"pdfFactory"

试用版本创建

www.fineprint.com.cn

Summary of Contents for G9657MA series






































































Search results

Summary of Contents for G9657MA series

Reviews:

Related manuals for G9657MA series

Brands by name

Popular brands

Foxconn G9657MA series, Manual

Search results

Summary of Contents for G9657MA series

Reviews:

Related manuals for G9657MA series

Brands by name

Popular brands