IMPORTANT!
Initial Operation
This electronic caliper comes supplied with a
battery and is instantly operational. However,
we suggest you read this manual prior to using
your instrument.
Internal Jaws
Locking Screw
Display
External Jaws
Function Buttons
Battery Cover
Beam
Depth Measurement Rod
Thumbroll
On/Off:
Press <on> button once to turn on.
Press button an additional time to turn off.
Zero Setting:
Press <zero> function button.
Change Measuring Standard:
Press <mm/in/F> function button to toggle
between mm, in or fractions.
Absolute/Incremental:
Press <abs> button, to
return to zero function press button again.
Once Display begins flashing:
•
Slide off the battery cover and rubber gasket,
then remove the battery by gently tapping the
instrument in your hand. (Never try to force
or pry the battery out). Insert the new battery
with the positive pole "+" facing upwards and
replace the gasket and cover.
•
Please dispose of used batteries at a proper
collection center.
Clean the caliper with a soft cloth. DO NOT
use any type of solvent. DO NOT immerse the
caliper in liquid.
Functions
Battery Replacement
Cleaning
Euro-Caliper IV
54-100-330-1
Step
Measuring
Face
In case of water / coolant splash:
The electronic unit for this instrument is water
resistant. In case of liquid splash, the display
may possibly fail. Wipe off the liquid, be sure the
liquid between the slider and beam is completely
dried. Then reset the instrument.
