Chapter 1
DaqPRO
19
•
When opening a stored recording.
The graphic display is available for recordings with up to 4 sensors simultaneously.
1. The Cursor
Use the
Cursor in Graphic Display
mode to read data values or to zoom in to the area around a
selected point. The cursor is displayed automatically after logging has ended, or when opening a stored
recording.
a. Use
the
Forward
and
Backward
arrow buttons to move the cursor.
DaqPRO
displays the point coordinates at the bottom of the graph.
b. If there is more than one sensor, press the
Enter
button
to move the cursor
to another plot on the graph.
2. Zooming
a. Position the cursor in the area you want to zoom into.
b. Press the two arrow buttons,
and
, simultaneously. You will zoom in
around the cursor in a 2:1 ratio.
c. Press
the
Escape
button
to zoom out.
www.esis.com.au
Ph 02 9481 7420
Fax 02 9481 7267
