MODEL: 11210918A
8 DRAWER ORGANIZER
CAUTION :
1. ADULT SUPERVISION IS REQUIRED DUE TO SMALL PARTS.
CARE SHOULD BE TAKEN IN THE UNPACKING AND
ASSEMBLY OF THE PRODUCT.
2. ASSEMBLE ON SOFT SURFACES TO PREVENT DAMAGE TO
THE PRODUCT FINISH.
3. MAKE SURE ALL PARTS ARE INCLUDED BEFORE ASSEMBLY.
BEFORE YOU BEGIN, PLEASE READ ASSEMBLY INSTRUCTIONS
CAREFULLY. FOLLOW THEM STEP BY STEP.
ASSEMBLY TOOLS REQUIRED
RUBBER MALLET
PHILIPS SCREWDRIVER
ASSEMB
LY
INSTRUCTIONS
Do you have any questions? Missing small parts or hardware? If you need
assistance with the assembly of your 8 DRAWER ORGANIZER please e-mail our
Customer Service Department at:
call us at (800) 639-3803 or (508) 435-4830
if calling locally
from Massachusetts area
Please include the following information in your email:
• Where item was purchased • Item, model, style or SKU number listed on
instructions or box • Part number, description of the part and quantity needed
This information will help us get the proper part to you faster
STEP 1
1.1 INSERT WOODEN DOWEL (3) TO SIDE PANEL (B) WITH GLUE (10).
1.2 INSERT PLASTIC DOWEL (4) TO CENTER PANEL (D) WITH
GLUE (10).
This unit is intended for use only with the products and maximum weights
indicated. Use with other products or products heavier than the maximum
weights indicated may result in instability causing possible injury.
Furniture can tip over or break if improperly moved. Have a friend help
to lift and carry the unit to its new location.
PARTS LIST AND HARDWARE
M4 x 32mm CHIPBOARD SCREW
NO
1
HARDWARE LIST
QTY
16 PCS
M3 x 9mm CHIPBOARD SCREW
2
4 PCS
WOODEN DOWEL
3
4 PCS
PLASTIC DOWEL
4
16 PCS
POWER PIN
5
18 PCS
L-BRACKET
6
2 PCS
NAIL LEG
7
4 PCS
BIG NON-WOOVEN BIN
8
4 PCS
SMALL NON-WOOVEN BIN
9
4 PCS
WHITE GLUE
10
1 PC
1 PC
QTY
TOP PANEL
NO
A
PARTS LIST
2 PCS
SIDE PANEL
B
3 PCS
SHELF PANEL
C
4 PCS
CENTER PANEL
D
1 PC
BOTTOM PANEL
E
1 PC
SKIT PANEL
F
2 PCS
G
3 WOODEN DOWEL - 4 PCS
4 PLASTIC DOWEL - 16 PCS
B x 2
D x 4
3
4
10
STEP 2
2.1 INSTALL L-BRACKET (6) WITH SCREW (2) TO SKIT PANEL (F).
**FOLLOW THE MARKING**
2.2 ATTACH SKIT PANEL (F) TO BOTTOM PANEL (E) WITH SCREW (2).
TIGHTEN THE L-BRACKET (6).
UNFINISHED SURFACE
UNFINISHED SURFACE
F
E
F
2 M3 x 9mm CHIPBOARD SCREW - 4 PCS
6 L - BRACKET - 2 PCS
10
10
C
A
D
C
C
E
D
D
D
D
D
D
D
A
C
C
E
C
B
B
STEP 3
ATTACH CENTER PANEL (D) TO THE PANEL (A)(C)(E) WITH
GLUE (10).
STEP 4
ATTACH SIDE PANEL (B) TO ASSEMBLED OF STEP 3 WITH
GLUE (10).
STEP 5
5.1 TIGHTEN WITH SCREW (1) TO SIDE PANEL (B), SHELF PANEL (C)
AND BOTTOM PANEL (E).
5.2 INSTALL NAIL LEG (7) TO THE BOTTOM OF SIDE PANEL (B)
WITH HAMMER.
1 M4 x 32mm CHIPBOARD SCREW - 16 PCS
7 NAIL LEG - 4PCS
STEP 6
ATTACH BACK PANEL (G) TO THE REAR POSITION OF STORAGE
WITH POWER PIN (5), AS SHOWN.
5 POWER PIN - 18PCS
B
C
C
C
E
B
STEP 7
UNFOLD THE BIN (8)(9) AND SLIDE IT IN THE STORAGE.
G
G
8
9
Shelf weight limit: 88.5 lbs.
(40kg)
Weight limit: 23.5 lbs.
(10.7kg)
Weight limit:
58.5 lbs. (26.5kg)
BACK PANEL