MODEL: 11210915A
COMPUTER DESK
CAUTION :
1. ADULT SUPERVISION IS REQUIRED DUE TO SMALL PARTS.
CARE SHOULD BE TAKEN IN THE UNPACKING AND
ASSEMBLING OF THIS PRODUCT.
2. ASSEMBLE ON SOFT SURFACE TO PREVENT DAMAGE TO
THE PRODUCT FINISH.
3. MAKE SURE ALL PARTS ARE INCLUDED BEFORE ASSEMBLING.
BEFORE YOU BEGIN, PLEASE READ ASSEMBLY INSTRUCTIONS
CAREFULLY. FOLLOW THEM STEP BY STEP.
ASSEMBLY TOOLS REQUIRED
RUBBER MALLET
PHILIPS SCREWDRIVER
Do you have any questions? Missing small parts or hardware? If you need
assistance with the assembly of your COMPUTER DESK please e-mail our
Customer Service Department at:
call us at (800) 639-3803 or (508) 435-4830
if calling locally
from Massachusetts area
Please include the following information in your email:
• Where item was purchased • Item, model, style or SKU number listed on
instructions or box • Part number, description of the part and quantity needed
This information will help us get the proper part to you faster
PARTS LIST AND HARDWARE
M4 x 38mm CHIPBOARD SCREW
NO
1
HARDWARE LIST
QTY
22 PCS
M3 x 9mm CHIPBOARD SCREW
2
8 PCS
3
12 PCS
PLASTIC DOWEL
4
5
6
NAIL LEG
7
4 PCS
BIN
2 PCS
WHITE GLUE
1 PC
STICKER
25 PCS
1 PC
QTY
LEFT SIDE PANEL
NO
A
PARTS LIST
RIGHT SIDE PANEL
B
TOP PANEL
C
LONG SHELF PANEL
D
SHORT SHELF PANEL
E
CENTER PANEL
F
TOP CROSSBAR
G
BOTTOM CROSSBAR
H
BOTTOM PANEL
I
1 PC
1 PC
1 PC
1 PC
1 PC
2 PCS
1 PC
1 PC
ASSEMB
LY
INSTRUCTIONS
STEP 1
INSERT PLASTIC DOWEL (3) TO SHORT SHELF PANEL (E),
CENTER PANEL (F) AND CROSSBAR (G)(H) WITH GLUE (6).
This unit is intended for use only with the products and maximum weights
indicated. Use with other products or products heavier than the maximum
weights indicated may result in instability causing possible injury.
Furniture can tip over or break if improperly moved. Have a friend help
to lift and carry the unit to its new location.
STEP 2
2.1 ATTACH SHELF PANEL (E) TO CENTER PANEL (F) WITH
GLUE (6).
2.2 ATTACH THE ASSEMBLED 2.1 TO LONG SHELF PANEL (D) AND
BOTTOM PANEL (I) WITH GLUE (6) ALSO TIGHTEN WITH
SCREW (2).
STEP 3
ATTACH THE ASSEMBLED SECTIONS FROM STEP 2 AND
CROSSBAR (G)(H) TO LEFT SIDE PANEL (A) WITH GLUE (6).
STEP 4
ATTACH RIGHT SIDE PANEL (B) TO THE ASSEMBLED SECTION
FROM STEP 3 WITH GLUE (6) AND TIGHTEN SIDE PANEL (A)(B)
SCREW (2).
STEP 5
5.1 ATTACH TOP PANEL (C) TO ASSEMBLED PARTS WITH
SCREW (1).
5.2 INSTALL NAIL LEG (4) TO SIDE PANEL (A)(B) WITH HAMMER.
STEP 6
TIGHTEN TOP/CENTER CROSSBAR (G) WITH SCREW (1),
AS SHOWN.
STEP 7
7.1 UNFOLD THE BINS (5) AND SLIDE INTO THE DESK.
7.2 PLACE THE STICKER (7) ON THE SCREW POSITION.
3 PLASTIC DOWEL - 12 PCS
6
E
H
F
Gx2
2 M3.5 x 32mm CHIPBOARD SCREW - 2 PCS
D
F
E
I
UNFINISHED
SURFACE
E
6
F
D
F
E
I
6
A
H
G
2 M3.5 x 32mm CHIPBOARD SCREW - 6 PCS
A
D
F
E
H
B
6
I
4 NAIL LEG - 4PCS
1 M4 x 38mm CHIPBOARD SCREW - 14 PCS
C
A
D
F
H
B
I
E
A
B
C
G
1 M4 x 38mm CHIPBOARD SCREW - 8 PCS
I
F
E
D
G
C
D
F
E
I
G
B
A
5
5
7
7 STICKER - 21 PCS
Weight limit: 71 lbs.
(32.4kg)
Weight limit: 43 lbs.
(19.5kg)
Weight limit: 116 lbs.
(52.7kg)
C
D
F
I
G
B
A
E