background image

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

WARNING: 
 

● 

Keep all children and pets away from assembly area. Children and pets should be 
supervised when they are in the area of the Gazebo construction. 

● 

Keep assembly area at least 6 feet from any obstruction such as a fence, garage,house, 
overhanging branches, laundry line, or electrical wire. 

● 

Some parts may container sharp edges. When assembling and using this product, basic 
safety precautions should always be followed to reduce the risk of personal injury and 
damage to the product. Please read all instructions before assembly and use 

● 

Check all bolts for tightness before use, and periodically check and tighten bolts as 
necessary. 

● 

Gazebo is designed for wind speeds of up to 30 miles per hour. Customer should 
disassemble the gazebos when there is a chance of wind speeds higher than 30 miles 
per hour. 

● 

Please take down the gazebo during strong wind. The manufacturer or retailer is not 
liable for any loss of the product or other items due to the failure to take down the 
gazebo during strong wind. 

8’X 5’ Grill Gazebo 

TV. No: 162455 

Summary of Contents for 162455






Reviews: