background image

 

 

24 

 

4.4 - Autonomy of the wheelchair  

 

The autonomy of your wheelchair depends on the batteries capacity of the wheelchair. 
To  summarize,  on  flat  ground  is  about  20  km  with  110  Amp,  30  km  with  lithium  160  Ah 
and more than 40 with gel 200 Ah. 
This autonomy is subject to the influence of various factors.  
In  practice  the  road  condition,  inclines,  driving  mode,  use  of  lights,  tyre  pressure,  total 
transported weight, outdoor temperature are some of the elements to be considered. 
The  way  the  batteries  are  charged  has  a  considerable  influence  on  the  energy 
consumption and thus affects the rapidity of discharge. 
 

Warning: at 10 km/h, a distance of 30 km is covered in about three hours.  

When  driving  outdoors  ensure  that  sufficient  energy  is  available  to  return  to  the 
point of departure. 

 

4.5 

– Tilt in space position 

 
-  Use  of  the  inclined  seated  position  modifies  the  balance  and  the  clearance  of  the 
wheelchair. 
- The user should take the time necessary 

to become aware of the wheelchair’s possibilities 

in this position. 
- On downward slopes,  when braking, risk of tipping is high. Your speed must therefore be 
adapted. 
- On upward slopes, this position is strongly advised against. It can increase tipping risk. 
- Activation of this mode engages a speed limiting device which limits speed parameters. 
 

To raise the seat while travelling press button II on the screen and keep pressed until 
the desired position is obtained. Release the button to stop the movement. 

To lower the seat while travelling press button I on the screen and keep pressed until 
the desired position is obtained. Release the button to stop the movement. 

 

Warning:

 The tilt-in-space activates the 

“speed limit” function which reduces the wheelchair 

speed. 
If your wheelchair performance seems lower than usual, double check that your seat is in the 
flat position. 

 

Summary of Contents for P4 Country v2

















































Reviews: