19
The area at the centre of the screen shows the mode that is currently active.
The areas at the side of the screen show the modes that will become active if the menu
navigation buttons are pressed.
3.3.3.1. The Status Bar
3.3.3.2 The System Status
The System Status icon is normally hidden. If a fault occurs, a wrench icon will show,
together with the fault code number. See the DX System Manual for a description of the fault
codes.
3.3.3.3. The Lighting Icons
The indicator icons and the side light icon will show when the lights are on.
3.3.3.4 The Time Clock
The real time clock shows the time in 24-hour format. The time can be adjusted with the On-
Board Programming menu.
3.3.3.5 Road Light
To
put the lights “ON” press more than 5 secondes on the leftt turn lighting
To
switch “off”, press again the same button.
3.3.3.6 Hazard
To
activate “hazard” press more than 5 secondes on the right turn lighting
To switch “off”, press again the same button.
3.4 - Turning the DX System on and off with the joystick remote
To turn on the DX System
Press the power button.
The joystick remote will beep twice and the system will start up in with the Drive
Profile that has been set.
Battery
Gauge
Left
Indicator
Active
Right
Indicator
Active
Real
Time
Clock
System
Status
Hazard Lights Active
3
Fault Code
Side Light
Active
Summary of Contents for P4 Country v2
