F3946 Series Router User Manual
Xiamen Four-Faith Communication Technology Co.,Ltd.
Page 66 of 88
Add
：
J1-J3,3
rd
Floor,No.44,GuanRiRoad,SoftWare Park,XiaMen .361008.China
http
：
//www.fourfaith.com
Tel
：
+86 592-6300466 6300465 6300464
Fax
：
+86 592-5912735
Stopbit:
The serial port’s stopbit
Flow Control:
The serial port’s flow control type.
Enable Serial TCP Function:
Enable the serial to TCP function
Protocol Type:
The protocol type to transmit data.
UDP(DTU) – Data transmit with UDP protocol , work as a Four-Faith DTU
which has application protocol and hear beat mechanism.
Pure UDP – Data transmit with standard UDP protocol.
TCP(DTU) -- Data transmit with TCP protocol , work as a Four-Faith DTU
which has application protocol and hear beat mechanism.
Pure TCP -- Data transmit with standard TCP protocol, router is the client.
TCP Server -- Data transmit with standard TCP protocol, router is the server.
TCST -- Data transmit with TCP protocol, Using a custom data
Server Address:
The data service center’s IP Address or domain name.
Server Port:
The data service center’s listening port.
Device ID:
The router’s identity ID.
Device Number:
The router’s phone number.
Heartbeat Interval:
The time interval to send heart beat packet. This item is valid only
when you choose UDP(DTU) or TCP(DTU) protocol type.
TCP Server Listen Port:
This item is valid when Protocol Type is “TCP Server”
Custom Heartbeat Packet :
This item is valid when Protocol Type is “TCST”
Custom Registration Packets:
This item is valid when Protocol Type is “TCST”
3.3.10
Administration
3.3.10.1
Management
The Management screen allows you to change the router's settings. On this page you will find
most of the configurable items of the router code.
The new password must not exceed 32 characters in length and must not include any spaces.
Enter the new password a second time to confirm it.
Note
：
Default username is root.
It is strongly recommended that you change the factory default password of the router, which
is admin. All users who try to access the router's web-based utility or Setup Wizard will be
prompted for the router's password.
