F2X46-D Series IP Modem User manual
Xiamen Four-Faith Smart Power Technology Co.,Ltd
.
Add
：
Floor 11, Area A06, No 370, chengyi street, Jimei, Xiamen.China
Page 24 of 30
Hotline
：
400-8838-199
Tel
：
0592-6300320
Fax
：
0592-5912735
connections and reconnections.
Polling mode
（
Y/N
）
: In multicenter mode, select multicenter connections for polling or
concurrent mode, input “Y”or”y” indicate using polling mode, all other inputs indicate using
concurrent mode.
TCP serve port/UDP source port
：
Listen on the port when it as TCP Server (Fill in 0
indicate close TCPServer function).
For the polling mode, datas will be sent in sequence according to the number of
configuration centers. Once the data is sent successfully, it is no longer sent to the next
center.
For concurrent mode, datas will be sent to all the centers according to the number of
configuration centers.
3.2.9 “Other configuration”
Maximum number of login: Default 10.
Remote telnet or not
：
Default NO.
Debug mode or not: Yes or No (Chose “Yes”, you can see the run logs through the serial
port tool),This parameter takes effect immediately upon completion of configuration.
3.2.10 “ Related settings of network management platform”
Serial No.:A king of number that the gateway platform can identify the device, 15-bit
string( Factory defined, can not be modified)
。
Working mode: Only SMS mode, SMS plus IP mode or disabled.
List of trust Numbers: Only receive user SMS of trust list, if the list is empty, SMS from
any user can be accepted.
Device number: Device identification of gateway platform(Factory defined, can not be
modified).
Gateway platform address: IP address and port number of gateway platform.
Gateway platform heartbeat interval (seconds): Heartbeat interval of gateway platform,
range: 30~600
。
3.2.11 “Administrator login Settings”
Administrator login account
：
Administrator Name Settings for administrator.
Administrator login password: Administrator password Settings.
Ordinary user login account: Name Settings for ordinary users.
Ordinary user login password: Password Settings for ordinary users.
3.2.12 “ICMP parameter setting”
ICMP detection of the host: Check whether the PPP connection is normal or not, fill in
