Page 18 of 47
Sleep/Wakeup
Made the IP Modem sleep or wake up depended on the I/O state
I/O
Set I/O port to trigger the IP Modem to sleep or wake up
MIXD
T
he combination of SMSD, CTRL, DATA. IP MODEM will be online when meet one
of these three trigger methods.
CALL Phone No.
Any phone number call can wake up IP Modem, if the trigger
number is empty. Otherwise only the trigger phone number call can
trigger the IP Modem.
SMS Phone No.
Any phone number’s SMS can wake up IP Modem, if the trigger
number is empty. Otherwise only the trigger phone number’s SMS
can trigger the IP Modem.
Data Trigger On
Online data
Data Trigger Off
Offline data
Trigger Port
Set the trigger data source from PORT1 or PORT2
Data Format
Format of the trigger data: Text or HEX
3.3.3.3 Debug Level
Debug information is used to debug software when there is software problem.
Debug Level
Close
：
no debug information output
Level 1
：
simple prompt information output
Level 2
：
detail debug information output
Debug Port
Port 1
：
debug info send to port 1
Port 2
：
debug info send to port 2
485
：
debug info send to RS485
3.3.4 Data Service Center Settings
Settings on this page are the parameters related to Data Service Center (DSC).