OWNERS MANUAL /
ISLA 40
17
ARRIVING IN A HARBOUR
Turn-off the engines
Switch-off the engines by pushing the STOP button, then press the ON/OFF
button to deactivate the system.
Disconnect all the functions
on the electrical panel.
Close all the gas supply valves
(bottle and appliances).
Check that the water has been drained from the bilges.
Disconnect the battery circuit breaker
when stopped for a long period.
Close the diesel tank valves
when stopped for a long period.
1
2
3
4
5
6
Unhook the safety hoist.
Drop the anchor and chain
to a few meters from the final length desired.
Hook the chain to the bridle snap hook
available in the anchor well.
Drop the end of the length of chain desired
until the anchoring tension is
picked up by the bridle.
1
2
3
ANCHORAGE
4
Start the starboard engine (1500 rpm).
The windlass is controlled using the remote control in the anchor well.
Setting up the anchor
4
1
3
Always let the engines run idle for a few minutes before shutting them
down completely.
WARNING
Summary of Contents for ISLA 40
