Fotric 340M Series User Manual Download Page 31

Page: 31 / 102

• Logo

•

Warning icon for SD card low storage capacity: displayed when SD card
storage is less than 100MB.

②

Measurement Result Table

Displays:

• On-screen highest, lowest, and average Temperature values and emissivity.

• ROI area’s maximum, minimum, average temperature values, emissivity and

area/length (available for 340A series) values. For specific configurations,
please refer to Section 4.9.3 ROI Display Settings

③

Palette and Temperature Scale Display

Displays: currently used palette ribbon, the upper and lower limits of temperature

scale range. For specific configurations, please refer to Section 4.5 Temperature
Scale Mode and 4.10 Palette.

④

Image Display

Displays : Thermal, Digital camera, Picture in Picture, Thermal & Visual light digital

camera mode(T-DEF) images and measurement tools. For specific configurations,
please refer to Section 4.7 Image Mode.

Summary of Contents for 340M Series







































































































Search results

Summary of Contents for 340M Series

Reviews:

Related manuals for 340M Series

Brands by name

Popular brands

Fotric 340M Series, User Manual

Search results

Summary of Contents for 340M Series

Reviews:

Related manuals for 340M Series

Brands by name

Popular brands