background image

2

Before connecting an external CD-R/RW drive and burning a CD-DA-format audio CD, read the fol-
lowing.

Important! CD-R/RW drives which can be connected to the MR-8HD

You can connect the MR-8HD [USB HOST] port to any CD-R/RW drive which has a [USB] port and
can be powered by AC main or batteries. The MR-8HD does not provide USB bus power facility
(which allows supplying power to an external device from the MR-8HD), therefore, you cannot con-
nect a CD-R/RW drive which only can be powered by USB connection.

Also note that the models which can be used with the MR-8HD may change. Check currently avail-
able CD-R/RW drives from Fostex website (http://www.fostex.com) before purchasing a drive unit.

Usable discs

Only discs with any of the following icons can be used with a CD-R/RW drive connected to the MR-
8HD.

Recordable

ReWritable

<CD-R disc>:

 You can make additional recording to a CD-R disc until it is

finalized if it is brand new and still has enough recordable area.

<CD-RW disc>:

 You can make additional recording to a CD-RW disc until

it is brand new and still has enough recordable area.

<CD disc>: 

You can view TOC information of a disc with this logo (such as

a commercially available CD) but you cannot make recording.

<Note>: Using a CD-R/CD-RW drive connected to the MR-8HD, you can record CD-DA format
audio tracks converted from stereo WAV files but you cannot play back audio discs you created (or
commercially available audio CDs).

Notes on handling of discs

*

When handling a disc, be careful not to dirty or scratch the
surface of the disc. We recommended that you hold the
disc with your finger on the disc edge and center hole.

*

Do not stick any paper, etc. on the label side. Also, do not
scratch the label side, which may cause problems during
playback or recording. Use only a felt pen or equivalent for
writing any memo on the label side.
Using a ball-point pen, pencil, etc. that has a hard tip may
damage a disc.

*

Never use a warped or chipped disc, which may damage
the CD-R/RW drive.

Notes on care of discs

*

If there is a dust, dirt or fingerprints on the disc, which may
cause error in playback or recording, wipe the disc with a
soft, dry cloth or alcohol from the center out.
Never wipe from the outside to center.

*

Read the attached manual packed with the disc before
using it.

Read this page before using!

Summary of Contents for MR-8HD









Reviews: