[ENGLISH] USER MANUAL
WIRELESS RAIN GAUGE
WITH INDOOR THERMOMETER
This manual is part of this product and should be kept in a safe place for
future reference. It contains important notes on setup and operation.
Introduction
Thank you for purchasing this Wireless Rain Gauge. Designed ofr
everyday use, the weather station will prove to be an asset of great
value for your personal use in the home or office. Please read this
instruction manual thoroughly to fully understand the correct operation
of your rain gauge and benefit from its unique feature
Package contents
z
1x Weather station base unit
z
1x Rain Sensor
z
Mounting Screw
z
Instruction manual
Function:
1)
Detail display of rainfall data in 1hour, 24hour, week and total
since last reset(user selectable in inch or mm)
2)
Radio controlled Clock with manual setting option
3)
Calendar (day-month-year display)
4)
Indoor temperature (
or
)
℃
℉
5)
Time zone setting
6)
12 or 24 hour time mode
7)
Free standing
Installation
Rain Gauge battery install
Note: please note the polarity when inserting/replacing batteries in
the unit, failure to do so may result in permanent damage. Use
good quality alkaline batteries and avoid rechargeable batteries.
- 1 -
z
This problem could also be a result of radio interference in your
neighborhood, try relocating the sensor and the base station
Remote sensor drops off intermittently
Possible interference from other sources, try relocating the sensor or
the base station. Radio device operation on the same frequency can
also cause interference.
Temperature is incorrect
.
Check/ Replace the batteries. Also make sure that the base station
is not place near objects that can act as sources of heat or cold.
Specifications
Outdoor data
Transmission distance in open field: . . . . . . . . . . . . . . . . 100meter max.
Frequency: . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
433.9MHz +/-250kHZ
Resolution:. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .. . . . . . . . 0.1
℃
Measuring interval remote sensor:. . . . . . . . . . . . . . . . . . . . . . . . . 48 sec
Water proof level:. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .. . . . . . IPX3
Current:. . . . . . . . . . . . . . . . . . . 15mA (HF transmitting), 10uA (Standby)
Indoor data
Indoor temperature range:. . . . . . . . . . . . . . . . . . . . . . . -9.9
℃
to +80
℃
Resolution :. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 0.1
℃
Power consumption
Base station :. . . . . . . . . . . . . . . . . . .
2XAA 1.5V LR6 Alkaline batteries
Remote sensor:. . . . . . .. . . . . . . . . 2xAAA 1.5V LR03 Alkaline batteries
Battery life :. .. . . . . . Minimum 12 months for both sensor and receiver
- 6 -
24hour and week rainfall record will be reset to 0. Press
RAIN
key for
approx 2 seconds at TOTAL rainfall mode, 1hour, 24hour, week and
TOTAL rainfall record will be reset to 0
Setting Mode
While in normal mode, press the SET key to select time or calendar
display. Calendar date display mode will be switched to time display
after 10s when no key pressed.
While in normal mode, press the SET key for 2 seconds to enter the
following setting modes in the following order :
1.
Time Zone Setting
z
The default
time zone
setting
value
is 0 based on
Germany DCF time
(
GMT+1
)
z
Time zone /-12 hours
z
For countries not at the same time zone area of Germany,
it is needed to set the correct time zone so
that correct time can be displayed after radio controlled
clock time is received successfully.
2. 12/24 hour format
3. Manual time setting (hours/minutes)
4. Calendar setting(in the order of year /month/ date) [after year setting,
month and date position can be selected before month and date value to
be set]
5. Temperature display unit degree Celsius or Fahrenheit
6. Rainfall unit mm or inch
In the setting modes, press RAIN key to select the units or scrolls the
value. Holding the RAIN key for 2 second will increase digits in great
steps. Press the SET key to accept the change and advance to the next
setting mode. Continue to press the SET key to toggle through the
setting mode until return to the normal Mode
Troubleshooting
No signal from remote sensor
There can be many reasons for this, the following steps should help you
troubleshoot this problem.
z
Make sure that the batteries in the remote sensor are not
depleted.
z
Reduce the distance between transmitter and receiver
z
Remove the batteries from the base station and the remote
sensor and reset the weather station in the right order as
described in section 2 of this manual.
- 5 -
This is a combined operation manual for WH0202 and WH0203. WH0202
can receive and display the DCF radio controlled time and date (RCC
function). WH10203 maintain all the functions of WH0202 just without RCC
function.
NOTE
※