5
When you plug in the Micro SD card during the camera work process, please reboot the camera again,
or else the Micro SD Card may be cannot work well.When you re-install the cover, please ensure the
tightness with the camera.
Warning:
Please lock the cover in time after installing the Micro SD card to avoid water or water vapor
fall into the equipment then cause damage or lens fog.
1.6 Wall Installation
Please refer to the
Quick Setup Guide
.
NOTE
: Ensure that the rain or water will not reach the connector ports at the end of the pig tail wiring.
These connectors are not weather-resistant.
The cable of an outdoor camera should, from the position where the cable is divided into several cables,
be fitted dry. Install the cable into a waterproof junction box (1) or bring the cable indoors (2).
