ShenZhen Foscam Intelligent Technology Co., Ltd
www.foscam.com
V4.8
EQ982117
FI9815P Supports I/Oalarm
WPS Connection
★
Quick Installation Guide
（
For Windows & Mac OS
）
Indoor HD Wireless IP Camera with P2P
Package Contents
Quick Installation Guide
Wi-Fi Antenna
Resource CD
Ethernet Cable
Power Adapter
Mounting Bracket
IP Camera
Warranty Card
Quick Installation Guide
（
For Windows & Mac OS
）
Indoor HD Wireless IP Camera
1
Hardware Introduction
Physical Description
Microphone
Infrared LED
LENS
Speaker
Reset Button
Mounting Port
OUT
IN
ANT
SD
WPS
AUDIO
DC 5V
LAN
Power
Power light
Network light
Output
Input
Antenna
WPS
SD Card Slot
Micro SD
IN
WPS OUT
I / O Alarm
ANT
DC 5V
I / O Alarm
IN/OUT
Network light
Power light
LAN
WPS
SD Card Slot
Antenna
Power
Hardware Connection
WPS
IN
OUT
ANT
SD
AUDIO
WPS
o
1.
Mount the antenna and make it stand vertically.
2.
Connect the camera to the LAN network (Router or Switch) via
network cable.
3.
Connect the power adapter to the camera.
2
Software Installation
1.
Insert the CD into the CD drive of your computer.
2.
Go to the folder “IP Camera Search Tool” and find the folder
“For Windows OS”or “For Mac OS”. Copy and paste the IP camera
tool file to your computer, or drag it onto your desktop.
Shortcut icon for Windows OS
Shortcut icon for Mac OS
Notes:
If your computer ( Windows OS ) supports autorun function,
you can find the corresponding file in the opened control
panel.
If your computer does not have CD drive, you can download
the IP camera tool from our website:
www.foscam.com
for free.
3
Access the IP Camera
in LAN
1.
Enable the DHCP feature of your router (Enabled by default
normally), then open the IP Camera Tool program. It should
display the camera’s IP address in your LAN (Local Area Network).
2
. Double click the camera list here, and your default browser
will open up to the camera’s login page. When logging in for the
first time, you will need to download and install the add-on.
Take Microsoft Internet Explorer as an example. For Google
Chrome, Apple Safari, or Mozilla Firefox, please refer to the User
Manual.
Note
：
Doesn't support 64-bit browser.
3.
After installing the add-on, refresh the browser and click
Login
.
Main stream offers the highest
quality video while Sub stream
offers less quality, but also less
delay when viewing.
Default username is admin with
no password.
4.
When you login for the first time, it will request that you
modify the default username and/or password
.
Input the
New
username
,
New password
, and
Confirm the password
,
click
Modify
to complete the modification. You will now use the
new username and password to login to the camera in the
future.
Input the
New username
,
New password
and
Confirm the password
.
5.
After
logging in, you will see live video on the interface.
Notes:
After logging in for the first time, it will go to "Setup Wizard”
automatically. Please set the basic parameters, such as camera
name, camera time, wireless settings and so on.
If you forget your username or password, you can press and hold
the reset button on the bottom of the camera using a pin for 5
seconds. This resets the camera to factory defaults.
If you want to access your camera over wireless or the Internet,
please continue with the setup by following the Wireless and
Remote Access steps below.
4
Wireless Connection
Your camera supports wireless connection (camera with PoE
does not support wireless connection). You could use either
of the following two ways to connect cameras and the
internet.
WPS (Wi-Fi Protected Set-up) connection: your wireless
router supports WPS function.
Configure the wireless connection manually: your wireless
router does not support WPS function.
Before using the WPS connection, the matters need attention.
Please make sure that your router supports WPS function,
and has been connected to the network.
If the camera have connected the network cable, please
disconnect it.
Click
Install