3
1.
into the monitor. See Fig. 5.
Note :
Use the adapter labeled OUTPUT: 6V DC with the monitor.
2.
Press the POWER button and keep it around 3 seconds to turn the monitor
on. See Fig. 5.
Note 1:
When power on the monitor, "Power" LED will light up (green light).
Note 2:
"Out of Range" will be displayed on the LCD screen if the monitor
exceeds the range (unlink).
Note 3:
Press the POWER button and keep it around 3 seconds to turn off the
monitor.
Monitor Remote Control Function
The monitor can control the movement of the camera. The camera head has the
ability to rotate up, down, right and left. Press the up or down buttons
on monitor to move the camera up or down. Press the left or right buttons
on monitor to move the camera left or to the right. See Fig. 6.
Zoom in Function
Press the Zoom/OK button on monitor once for a 2X zoom of image and press
again to change back to normal view. See Fig. 7.
VOX ( Voice-Operated Transmission) function
1.
Press the VOX button on the monitor unit to enable the VOX function.
This will turn OFF the screen but the VOX LED will remain ON (green)
to remind you the VOX function is enabled. See Fig. 8.
2.
When the sound from the camera reaches the setting level (See Fig. 17), the
screen will turn ON
automatically. It will turn OFF
again after 30 seconds. If
the sound from the camera still reaches the setting level during the 30 seconds,
it will extend 30 seconds to turn OFF
the screen from the last voice event.
Volume Setting
1.
Press the volume setup button to enter volume setup. See Fig. 9.
2.
Press up or down buttons to adjust volume level, and then press ok
button to confirm the setting. Fig. 9.
Talkback Function
Press the talkback button to speak through the camera unit, and the icon
will then be displayed on the screen. See Fig. 10.
Using AC Power
Plug one end of the provided power adapter into a wall outlet and the other end
2
.2
2
.3
2
.4
2
.5
2
.6
