Quick Installation Guide
Indoor HD IP Camera with P2P
V1.2
EE200553
"Foscam" App download
Package Contents
IP Camera
AC Adapter
Resource CD
Quick Installation Guide
USB Power Cable
Front panel
LAN
WPS/Reset
SoftAP
Power
Micro SD Card Slot
Network light
Power light
Microphone
Infrared LED
Lens
PIR
Rear panel
Network Light Description
Off No Wi-Fi connection
Constant
Flash
Wired connection
Flashing every 0.1 seconds Soft AP takes effect
Flashing every 0.2 seconds EZLink takes effect (default)
Flashing every 0.4 seconds WPS is connecting
Slow Flash every 1.0 second
Wi-Fi connected
1
Hardware Introduction
1.
Connect the AC power adapter to the camera.
2.
Turn on your wireless router.
Physical Description
WPS
1.
Rotate the base of the camera (gray section highlighted
below) so tabs a and b overlap, then remove the base.
2.
According to the monitored area, install the base of the
camera on the ceiling or wall with expansion screws.
3.
Ensure tabs a and b align, and push the camera body to
make it flush with the base. Rotate the camera body, so
that a and b do not overlap, the installation is complete.
a
a b
b
Security Warning Card
Foscam Digital Technologies
Model: C1
Quick Installation Guide
Indoor HD IP Camera with P2P
"Foscam" App download
Foscam Digital Technologies
Hardware Installation
Hardware Connection
Before you continue, please note:
Make sure your smartphone is located near the camera.
Do not use an ethernet cable to connect the camera if
you want to use a wireless connection.
Make sure your smartphone is connected to your
wireless router.
Security Warning
Foscam cameras require good security practices to
safeguard your privacy. You can help protect your
camera by changing the default username and/or
password.
You should update your camera regularly at
http://www.foscam.us/firmware.html. Make sure your
camera has the latest firmware installed for your
specific camera model.
The Information of Network Light
